Famco Chimney Cap & Crown Nationwide

Famco Chimney Cap & Crown in Chesapeake: What to Know First

We provide independent Famco chimney cap and crown service throughout Chesapeake, from Great Bridge to Hickory, with most Famco cap replacements and crown repairs completed in a single visit and priced upfront before we start. As an independent Famco service provider, we carry the model-specific parts and fittings our techs see most often in Hampton Roads homes, and we back every job with our 90-Day Done Right Promise in writing. If you own a Famco chimney cap or crown that’s rusting, leaking, or pulling away from the flue, call us at (757) 590-6579 for a free estimate with photos you can see and a plain-English verdict.

Call (757) 590-6579

How Famco Products Fail - and How We Fix Them

• Famco stainless single-flue caps (model 3000 series) - fastener corrosion in Chesapeake salt air. The 3000 series uses 410-grade stainless hardware that holds up inland but degrades faster within ten miles of the Elizabeth River. We see the mounting bolts seize or snap during removal, especially on caps installed 8-12 years ago. We drill out corroded hardware, switch to 316 marine-grade fasteners, and seal the base with high-temp silicone rated for coastal exposure.
• Famco galvanized multi-flue caps - base pan rust-through at the corners. The galvanized multi-flue units common in 1990s Chesapeake construction collect acidic condensation where the base pan folds. Water pools in those corners, accelerates rust, and stains the brick below. We fabricate a replacement pan from heavier 24-gauge galvanized or upgrade to stainless if the flue configuration allows, then reflash with copper or lead-coated copper to match the existing masonry.
• Famco wind-directional caps - seized rotation bearings after pollen season. The wind-directional series with the rotating hood jams when pine pollen, common in Chesapeake’s spring, packs the bearing race. Owners smell smoke backup on calm days because the hood won’t pivot to catch a draft. We disassemble the bearing assembly, clean and lubricate with high-temp graphite compound, or replace the entire rotating collar if the races are pitted. We also recommend a mesh spark arrestor upgrade if the original lacked one.
• Famco concrete crowns - hairline cracking from thermal cycling. Famco’s poured concrete crowns, installed as original equipment on many Chesapeake tract homes from the 1980s, develop map cracking within 15-20 years. Our freeze-thaw cycles open those cracks every winter, and by February water’s wicking into the crown body. We grind out cracks wider than 1/8 inch, apply a flexible crown coat such as CrownCoat or a similar professional-grade product, and seal the entire surface. For crowns with structural spalling, we form and pour a new concrete cap with proper overhang and drip edge.
• Famco chase covers on prefab chimneys - corner seam separation. The factory-sealed corners on Famco chase covers fatigue where the metal flexes most, especially on taller chase structures in Chesapeake’s open exposures. Water runs down the inside face of the chase, rots the framing, and shows up as ceiling stains. We remove the cover, assess the framing damage, and either reseam with a brake-formed corner and soldered joint or fabricate a custom replacement chase cover with cross-breaks for rigidity and proper diverter flashing.

Our Famco Chimney Cap & Crown Process

1. 1
   Call and schedule. A live person answers, 24 hours a day. We book a window that works for you, not a four-hour guess.
2. 2
   Level-2 camera inspection on arrival. Our tech photographs the cap or crown from the roof and runs a camera down the flue to check for hidden water damage or liner deterioration. You see the photos. We explain what we’re looking at.
3. 3
   Parts decision: OEM Famco or quality equivalent. If Famco still produces the exact part, we’ll source it. If the line is discontinued, we match the spec with compatible professional-grade materials from our inventory, including Gelco or Olympia Chimney fittings when appropriate. We tell you which route we’re taking and why.
4. 4
   The repair or replacement. Background-checked, uniformed technicians complete most Famco cap and crown jobs in one visit. We protect your roof, your landscaping, and your time.
5. 5
   Post-repair test and documentation. We verify draft performance, check for leaks with a water test on crowns, and email you the photo report with our plain-English verdict.
6. 6
   The 90-Day Done Right Promise. In writing. No arguing. If it’s not right, we come back.

What Famco Chimney Cap & Crown Costs in Chesapeake

These are real Chesapeake numbers based on jobs we’ve done in neighborhoods from Great Bridge to Greenbrier. The only way to know your exact price is to see the chimney. Estimates are free, and the number we give you is the number on the invoice. Call (757) 590-6579 to schedule.

Why Chesapeake Homeowners Call Hearthstone Chimney Co. for Famco Work

We’ve been working on Chesapeake chimneys since before the city incorporated, and we’ve seen Famco products come and go from the market. Russell Haines and our crew know which Famco series were built to last and which ones need watching. When Famco parts are discontinued, we don’t disappear, we adapt, drawing on professional-grade alternatives from DuraFlex, HeatShield, Gelco, and Olympia Chimney to keep your system sound. Our 90-Day Done Right Promise means if the cap leaks or the crown cracks through, we return. No paperwork battle. No “that’s normal.” Just the fix, done right, and we stand behind it.

FAQs